An Impact Driver (sometimes referred to as an Impact Screwdriver) is a powerful tool which saves homeowners, do-it-yourselfers, construction workers, plumbers, and many others a lot of time and effort. Here are a few tips and reminders on using the Makita BTD144 Impact Driver.
1. You can position the Belt Hook (just put it in the right-side or left-side groove and tighten the screw) that comes with the Makita BTD144 on either the right or left side of the driver's tool housing. That way you can hang the driver on your belt on either your right or left hand side depending on which of your hand you want to grasp it with. Also, if you prefer not to have the belt hook on at all, you can just remove it. It doesn't affect the operation of the driver.
Makita 1 2 Drill
2. The LED (light-emitting diode) indicator acts as a battery usage gauge. If your battery charge is okay, the indicator will not light up. However, when your remaining battery capacity reaches 20 percent, the indicator will light up. If the indicator light begins flickering, that means that the battery is almost used up and you need to put a charged battery in the driver and put the battery you are removing in the charger.
3. The driver will stop automatically if you keep the driver's trigger suppressed for more than 2 minutes. To reset the driver, just release the trigger.
4. Recharge your driver's batteries only with a battery charger recommended by Makita. Using an inappropriate charger may create a fire hazard.
5. Never recharge a fully charged battery. Overcharging the battery will shorten the battery's overall life.
6. Always check the direction of your driver's rotation before starting to use the driver. That is, make sure it will be tightening if you want it to be tightening and loosening if you want it to be loosening. Additionally, never use the reversing switch on the driver until the driver has completely stopped. Changing the driver's direction of rotation before the driver stops turning can damage the driver.
7. Rule of thumb: For small screws use the hammer mode soft speed setting, and for long screws or for tightening bolts use the hammer mode hard speed setting. If you are not sure which setting to use, start out in the soft mode speed setting and slowly tighten your squeeze on the trigger to judge the results. If the soft mode speed setting is not sufficient, switch to either the medium or hard mode settings and try again.
8. Make sure the bit is fully inserted and secured in the driver before you turn the driver on. If the bit cannot be firmly secured by the driver, don't use it.
9. Be extra careful when fastening small screws that you do not strip the screw head. Carefully adjust your squeezing pressure on the driver's trigger to help prevent this. Also, make sure you are using the correct size screw bit.
10. If the impact driver becomes too hot during use, the light will begin flickering at the rate of 2 times per second. To correct the problem, all you have to do is turn off the driver and let it cool off completely before restarting it.
I hope these tips and reminders are helpful to you.
Cyber Monday Makita T-01389 62-Piece Impact Drill-Driver Bit Set 2011 Deals
Dec 02, 2011 01:47:27
Click for larger image and other views
Cyber Monday Makita T-01389 62-Piece Impact Drill-Driver Bit Set Feature
- 135-degree split-point tip
- 1/4-inch shank size
- 62-piece set
- Includes clam shell carrying case
- Compatible with all drills
Cyber Monday Makita T-01389 62-Piece Impact Drill-Driver Bit Set Overview
Includes seven black oxide precision 135-degree split point 1/4-inch hex shank drill bits, (2) 1/16-inch, 3/32-inch, (2) 1/8-inch, 3/16-inch, 1/4-inch, (3) wood boring drill bits 1/2-inch, 5/8-inch, 3/4-inch, (9) 2-inch driver bit assortments: slotted, Phillips, Robertson & Torx, (32) 1-inch driver bit assortment: slotted, Phillips, Robertson & Torx, (2) hex-to-square socket adapter: 1/4-inch - 1/4-inch, 3/8-inch, (1) max-mag nut drivers: 1/4-inch, 5/16-inch, 3/8-inchCyber Monday Makita T-01389 62-Piece Impact Drill-Driver Bit Set Specifications
The Makita T-01389 62-piece drill and driver set is a great value -- more accessories, more savings. Every tool is black-oxide coated to resist corrosion, and given a proprietary heat treatment for sharper, longer lasting life. Manufactured with Ultra-Lok 1/4-inch hex shanks, the tools are compatible with all quick-change connector systems, electric or battery-powered drill/drivers, and impact drivers. The drill bits are manufactured using high-speed steel with precision 135-degree split-point tips to prevent drill bit walking. The pro-grade, maximum magnetic 3-inch bit holder and nut drivers provide extra-strong fastener retention. View larger | ||||
|
| ||||||||
| ||||||||
Get the right accessory for your toughest applications. Makita has a full line of accessories including framing blades with advanced "M-Tooth" design, ultra-coated miter saw blades, steel demolition bits, Optimum diamond blades, Thruster Percussion bits, Blue Steel CERMET-tipped blades, and many, many more. Expand your LXT cordless lineup with 18-volt lithium-ion batteries, Energy Star-rated battery chargers, flashlights, and jobsite radios.
About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S.Makita is Best in Class Engineering.
| Whats in the Box Makita T-01389 62-Piece Impact Drill-Driver Bit Set includes: Injection molded case (33) 1-inch Driver bit assortment: | ||||
| Phillips bits: | Robertson/Square drive bits: | Torx bits: | Slotted bits: | |
| (9) 2-inch Driver bit assortment: | ||||
| Phillips bits: | Robertson/Square drive bits: | Torx bits: | ||
| (7) UltraLok black oxide drill bits precision/135° split point 1/4-inch hex shank: 2 1/16-inch, 3/32-inch, 2 1/8-inch, 3/16-inch, 1/4-inch (4) Wood boring spade drill bits with spurs: 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch (3) 3.5-inch Extended length driver bits: Phillips bits: 2 Phillips #2 Robertson/Square drive bits: 1 Robertson #2 (3) Magnetic nut drivers: 1/4-inch, 5/16-inch, 3/8-inch (2) Hex-to-Square socket adapter: 1/4-inch, 3/8-inch (1) Magnetic bit holder | ||||
SAVE NOW on Cyber Monday offers below!
Available In Stock. |
| This Cyber Monday Makita T-01389 62-Piece Impact Drill-Driver Bit Set ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
